03 / Gain staging
Read the meter
The green band includes −18 dBFS but excludes −6 dBFS. These bands belong to the game, not a required target for every mix. The waveform and meter display the simulated signal rather than measuring your audio.
Start with −6 dBFS. Choose a gate to see what happens before recovery. This example doesn’t change your progress.
- Below −36 dBFS
Noise floor
Integrity drains by 5 points per second. Bring the signal up carefully.
- −36 to below −18 dBFS
Low
You are not clipping or losing integrity here, but the sweet-spot streak does not build.
- −18 to below −6 dBFS
Sweet spot
Build score and combo while you stay here. Aim for this range when you cross a gate.
- −6 to below 0 dBFS
Hot
Still below clipping, but you have little room for the next boost. No sweet-spot score builds here.
- 0 dBFS or higher
Clipping
A clipping gate costs 15 integrity points and resets the combo. A recovery gain stage brings the displayed level back to −6 dBFS.
04 / Trial map
World 01: Input Stage
Trials unlock in order. Finish the previous one with at least one star to open the next. Replay an unlocked trial to improve its score or star rating.
- Trial 01 · Input Stage
First Signal
Leave room for the next stage. Louder is not automatically better.
- Duration
- 60s
- Lanes
- 3
- 2 stars
- 1,800
- 3 stars
- 3,000
- Trial 02 · Input Stage
Find Your Balance
Turn down a hot input before it reaches the next processor.
- Duration
- 65s
- Lanes
- 3
- 2 stars
- 2,300
- 3 stars
- 3,500
- Trial 03 · Boss encounter
The Clipper
Good gain staging prevents clipping. Recovering after distortion is not the same as preventing it.
- Time limit
- 90s
- Lanes
- 3
- 2 stars
- 800
- 3 stars
- 1,200
- Trial 04 · Precision
Channel Strip
Read four lanes. Choose the gain that leaves room.
- Duration
- 75s
- Lanes
- 4
- 2 stars
- 2,300
- 3 stars
- 3,500
- Trial 05 · Advanced
Bus Summing
Faster decisions. Recover between demanding sequences.
- Duration
- 85s
- Lanes
- 4
- 2 stars
- 2,300
- 3 stars
- 3,500
- Trial 06 · Endurance
Boss Battle!
The final four-lane endurance run. Despite its name, the objective is to survive the timed course, not to defeat another boss.
- Duration
- 100s
- Lanes
- 4
- 2 stars
- 2,300
- 3 stars
- 3,500
05 / Boss encounter
Face The Clipper
Stay in the sweet spot to deal steady damage, and land perfect gates to score extra hits. At 3× combo and above, the steady damage increases. The marked lane reads Surge ? until one second before impact. The revealed gain already includes the overload bonus.
- Above 100 HP
Input overload
The overload adds +3 dB to that lane’s base gain. Look for a safer lane before the row arrives.
- Above 50 to 100 HP
Redline pressure
The overload adds +6 dB to that lane’s base gain. Look for a safer lane before the row arrives.
- 50 HP or less
Final surge
The overload adds +9 dB to that lane’s base gain. Look for a safer lane before the row arrives.
06 / Performance
Keep the combo alive
Hold the green zone
Earn 10 points per second at 1× while in the sweet spot. Every 3 seconds in a continuous streak increases the multiplier, up to 5×.
Land perfect gates
A gate that leaves you in the sweet spot adds 50 points. Leaving the zone breaks the streak, even if you did not clip.
Finish to earn stars
A clear earns one star. Reach the trial’s two score thresholds to earn the second and third. A failed or abandoned run earns no stars.
Read your performance
The result reports your score, share of time in the sweet spot, clipping events and remaining integrity. Use those readings to choose what to practise next.
07 / Progression
Every star upgrade counts
A first clear can earn Gold, Materials and Crystals for Producer Island, Soul Shards for the Dungeon Armory, and XP. A new personal star tier pays only the difference. Repeating the same or a lower tier doesn’t pay twice.
| Resource | 1 star | 2 stars | 3 stars |
|---|---|---|---|
| Gold | 250 | 500 | 1,000 |
| Materials | 125 | 250 | 500 |
| Crystals | 62 | 125 | 250 |
| Soul Shards | 12 | 25 | 50 |
| XP | 63 | 125 | 250 |
08 / After the run
Take it back to your DAW
Leave space for the next stage
Think in two gates at once. If you’re already near −6 dBFS, a small boost can put the next positive gate out of reach.
Attenuation is a tool
Turn a hot signal down before it overloads the next stage. In your DAW, watch the input and output meters around each processor.
Use 0 dB on purpose
If the level is already in the sweet spot, a neutral gate lets you keep your current gain instead of correcting a problem you don’t have.
Prevent clipping rather than fixing it
Recovery keeps the run moving, but it cannot undo the integrity loss. In a real session, turning a clipped signal down does not restore the original waveform.
